The Ballscratcher 2.0
(Your shopping cart is empty)
Deal of the Day
Uniforms and Pinnies
Bleachers and Benches
International Lacrosse Specials
Speed and Agility
Follow us on Instagram
Accept Credit Cards Online
The BallScratcher 2.0
Suggested Retail: $139.99
You save $40.99!
Stock Status:In Stock
Free Shipping within the Continental US Only
Stop throwing away your lacrosse balls! The Lacrosse Ball Refurbisher is making lacrosse affordable to all.
Drill not included
Tired of spending a fortune on lacrosse balls? Tired of seeing kids chuck “Greasers” over the fence? Tired of blowing your team’s budget on balls that only stay grippy for a few weeks? You can clean them, but you can’t re-grip them? The Ballscratcher 2.0 is the most affordable, effective, portable and easy to use lacrosse ball refurbishing solution on the market today. Whether playing on grass or turf, lacrosse balls lose their grippy feel within a few weeks. The result? A bag of “Greasers” or “Shiners” that none of the players want to use. The answer is here. In only a few minutes, you can refurbish a large number of slick balls and have them back into playing condition in no time. From top to bottom, the balls in your practice bucket will feel and perform like new. No more blaming an errant pass or shot on a Greaser! The Ballscratcher 2.0 will bring back the correct feel of lacrosse balls to extend their usable life. Practice time will be more productive with the most cost effective, new product that is a must-have for any team, program and player. All you need is the Ballscratcher 2.0 and a drill
Free Shipping within the continental United States only
ReGrip It ‘n Rip It!
READ INSTRUCTIONS COMPLETELY BEFORE USE!
THE BALLSCRATCHER 2.0 IS NOT A TOY!
THE BALLSCRATHER 2.0 IS NOT INTENDED FOR USE BY MINORS!
ADULT SUPERVISION REQUIRED!
The Ballscratcher 2.0 is an exciting new, affordable innovation designed to make “Shiners”,”Greasers,” or slick, worn lacrosse balls a thing of the past. In as little as one minute, you can bring six to eight slick, worn balls back to playable condition by restoring that “grippy” feel you love with new balls.
The Ballscratcher 2.0 is not intended to replace regulation Game Balls, but rather to allow any individual or team to make the best use of practice balls by making them look, feel, pass, and shoot like new. Don’t throw them out!
*Power Drill is not included. Please follow the drill’s manufacturer for safety instructions.
•Only operate The Ballscratcher 2.0 outdoors. Use on pavement or dry ground is recommended.
•Operating The Ballscratcher 2.0 indoors may cause damage to floors and require a substantial cleanup from the ball residue created through operation of The Ballscratcher 2.0.
Operating and Care Instructions: Operating the Ballscratcher 2.0:
1. Remove lid. Do not remove the upper guide bracket attached to the underside of the lid. This bracket is critical to the safe and effective operation of THE BALLSCRATCHER.
2. Insert 6 to 8 balls in the Ballscratcher 2.0.
Note: For best results, 6 – 8 balls should be resurfaced at a time. Much of the resurfacing activity in the Ballscratcher is initiated by the agitation of multiple balls reacting with each other. If only 1 or 2 balls are placed in the unit, there is a risk of uneven abrasion, creating a ball that is noticeably “out of round.” Inserting more than recommended number of balls can result in balls becoming “pinned” and may result in damage to the unit, uneven abrasion, or flat spots.
3. Replace Lid, making sure lid is firmly secured on bucket.
•Important! The Ballscratcher 2.0 is designed only to operate properly and safely with the lid in place. Failure to operate the Ballscratcher with the proper lid in place could result in damage to the Ballscratcher 2.0 as well as serious injury.
4. Tighten drill chuck on the drive shaft protruding through the center hole in the lid. Once drill chuck is tightened securely, place the drill-less hand or one foot on the top of the lid to hold unit firmly in place.
•Note: The Ballscratcher 2.0 is designed to work best with a cordless 3/8 drill. A cordless 14.4v or 18v drill will work very well. Please use caution if using a corded drill, as most corded drills run at a much higher RPM rate than a cordless drill. If you are using a corded drill, be sure that the power cord is kept well clear of the rotating shaft, and operate at reduced speeds until you find the proper speed for optimum results. Single Speed corded drills are not recommended.
5. IMPORTANT!!! Before operation, be sure that no loose clothing, hair, jewelry, shoe laces, pant cuff, or electrical cords are near the rotating shaft assembly! Allow drill to spin disc. No downward pressure is necessary on the drill and rod. Hold The Ballscratcher 2.0 by applying pressure to lid and bucket with your free hand or foot. Not to be operated wearing cleats or healed shoes, recommend flat rubber soled shoes.
Grip drill securely, start drill, making sure to hold The Ballscratcher 2.0 firmly in place with foot or free hand while in operation. Depending on the condition of the balls being resurfaced, 45 to 75 seconds should be sufficient for full resurfacing. Note: Minimal down force is required during operation, and excessive down force may damage the abrasive element. Allow drill to spin the disc freely. Secure the unit with free hand or foot while operating.
6. After 45 seconds of operation, stop drill, turn to loosen chuck, remove drill from shaft, making sure that the rotation of the unit has come to a complete stop. You will be able to tell that the balls are becoming grippier through increased agitation inside the unit.
7. Remove lid, and remove the resurfaced balls from The Ballscratcher 2.0 container. Examine resurfaced balls to make sure all slick/ worn spots have been resurfaced.
8. Repeat for 20-30 seconds if any slick spots are in evidence.
9. For best results, rinse resurfaced balls away from unit with water or damp rag, and allow to dry before using them in play.
With proper care, The Ballscratcher 2.0 will provide for several seasons, refurbishing hundreds, if not thousands of balls.
Adult supervision required. The Ballscratcher 2.0 is not a toy. Serious injury could result if used improperly.
Keep all loose clothing, hair, jewelry, pant cuff, shoe lace and electrical cords clear of moving parts.
Do not operate where dust accumulation is undesirable (i.e. the kitchen, office, living room or near computer)
Minimal down force required when operating The Ballscratcher 2.0. Excessive down force may damage the sanding element. Allow the drill to do all the work, spinning and scratching.
Keep unit dry. Do not store outside, as parts will rust if exposed to the elements.
Balls should be clean and dry before inserting in The Ballscratcher 2.0. Dirt, mud, water, and other debris will damage the unit and decrease the life and effectiveness of the resurfacing elements.
Dispose of ball dust properly. Ball dust will accumulate on the container’s walls and below the resurfacing element. Invert the Ballscratcher 2.0 and discard loose dust into a proper trash receptacle. DO NOT rinse with water.
Balls left outside in the element will become stained and moldy. While you can bring back the surface texture, The Ballscratcher many not remove the discoloration stains which have penetrated the surface. It is not about how it looks but how it feels!
Have comments or suggestions?
ReGRIP It and Rip It!
Lacrosse Ball Club Pack
Our Price: $139.95
Case 120 Lacrosse Balls - Meets NOCSAE Standard
Our Price: $162.00
Bucket of 50 NFHS LACROSSE GAME BALLS
Our Price: $94.99
60 White Lacrosse Balls - Meets NOCSAE Standard
Our Price: $89.95
Bucket of 40 Lacrosse Balls Meets NOCSAE standard
Our Price: $94.99
Share your knowledge of this product with other customers...
Be the first to write a review
Browse for more products in the same category as this item:
Terms & Conditions
We Respect Your Privacy
Copyright ©2014 LacrosseBallStore.com and Nomad Lacrosse Distributors LLC .All other marks are the property of their respective owners. All rights reserved.